Abstract
A generic numerical model using the large eddy simulation (LES) technique is developed to simulate a non-buoyant vertical jet in wave and/or current environments. The experimental data obtained in five different cases, i.e., one case of the jet in a wave only environment, two cases of the jet in a cross-flow only environment and two cases of the jet in a wave and cross-flow coexisting environment, are used to validate the model. The grid sensitivity tests are conducted based on four different grid systems and the results illustrate that the non-uniform grid system C (205×99×126 nodes with the minimum size of 1/10 jet diameter) is sufficiently fine for the modelling. The comparative study shows that the wave-current non-linear interaction should be taken into account at the inflow boundary while modelling the jet in wave and cross-flow coexisting environments. All numerical results agree well with the experimental data, showing that: (1) the jet under the influence of the wave action has a faster centerline velocity decay and a higher turbulence level than that in the stagnant ambience, meanwhile the “twin peaks” phenomenon exists on the cross-sectional velocity profiles, (2) the jet under a cross-flow scenario is deflected along the cross-flow with the node in the downstream, (3) the jet in wave and cross-flow coexisting environments has a flow structure of “effluent clouds”, which enhances the mixing of the jet with surrounding waters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have