Abstract
Microalgae are unicellular and photosynthetic microorganisms which grow thanks to inorganic salts, CO2 and light, and find applications in several fields thanks to their variety. The industrial application of microalgae has not often been fully exploited because of a lack of information about how microalgae respond to inputs and to different growth environments. In the present work a model able to predict the microalgae growth in reactors with different geometries was developed. We combined a Monod-like model for the specific growth rate with the Lambert-Beer law of homogeneous light distribution in thick photobioreactors. Kinetic parameters related to the cultivation of the microalga Nannochloropsis gaditana were obtained, for the first time through batch cultivation under different photon flux densities inside a quasi-isoactinic photobioreactor, in order to obtain a practically homogeneous light distribution. The maximum specific growth rate and saturation constant resulted, respectively as µmax = 0.0256 h−1 and Ik = 15.28 µE s−1m−2. These parameters were applied to the model to obtain data on microalgae growth in different geometries. Model simulation results are presented and discussed. Furthermore, biochemical analysis was performed on the biomass obtained at the end of each batch cultivation, grown both under different light intensities and in reactors with different configurations. Results indicated that lipid content increases with increasing average photon flux density. The fatty acid and carotenoids profiles markedly shift when the average light intensity varies: the PUFA content decreases and the SFA content increases when the average light intensity rises, and an accumulation of carotenoids at lower photon flux densities is observed. In conclusion, the model resulted in a useful tool, able to predict the growth of the microalga Nannochloropsis gaditana in reactors with different configurations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.