Abstract
Particulate matter (PM) emissions constitute a major air pollution concern for commercial poultry production facilities. Recently, the electrostatic precipitator (ESP) has emerged as a promising technology for mitigation of poultry PM. However, further optimisation of ESP design, operation scale, and operating parameters is necessary for improved PM removal efficiencies and practical applications in poultry facilities. In this study, a comprehensive model of the poultry PM collection process in a simulated ESP module was developed using COMSOL software. The model simulated airflow characteristics, electric field and space charge development, particle charging, and particle trajectory tracking of both PM10 and PM2.5. Wire-plate ESP configurations with varying design parameters, such as number of wire electrodes and plate separation distance, were simulated using the COMSOL model at an inlet air velocity of 2.0 m s−1 to identify the optimal configuration for development of ESP physical prototypes. The model was validated by laboratory testing of a prototype ESP within a wind tunnel under three sets of ventilation conditions representing hot, warm, and cold weather, respectively. The prototype ESP exhibited PM10 collection efficiencies of 90.8%, 97.1%, and 99.0% in hot, warm, and cold weather conditions, respectively. The observed PM2.5 collection efficiencies under these respective conditions were 86.9%, 94.4%, and 97.8%. This COMSOL model can be used as an inexpensive alternative to developing physical prototypes when evaluating ESP designs for PM mitigation in poultry facilities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have