Abstract

This research is aimed to design and implement Proportional Integral Derivative (PID) controller on Two-wheeled self-balance (TWSB) robot. The PID is used for the purpose of balancing the robot to stand still at upright position and to receive command via Bluetooth to follow the desired trajectory smoothly. The dynamic model of TWSB robot was developed using Lagrangian method. The PID gains were tuned until the optimum values are achieved. The Arduino based PID-controller was implemented on the TWSB robot in real world experiment. The experimental result shows the effectiveness of the proposed controller for stabilization and trajectory tracking control of TWSB robot.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.