Abstract
In the present study, the effects of Organic Rankine Cycle (ORC) and turbo-compound (T/C) system integration on a heavy-duty diesel engine (HDDE) is investigated. An inline six-cylinder turbocharged 11.5 liter compression ignition (CI) engine employing two waste heat recovery (WHR) strategies is modelled, simulated, and analyzed through a 1-D engine code called GT-Power. The WHR systems are evaluated by their ability to utilize the exhaust excess energy at the downstream of the primary turbocharger turbine, resulting in brake specific fuel consumption (BSFC) reduction. This excess energy is dependent on the mass flow rate and the temperature of engine exhaust gas. However, this energy varies with engine operational conditions, such as speed, load, etc. Therefore, the investigation is carried out at six engine major operating conditions consisting engine idling, minimum BFSC, part load, maximum torque, maximum power, and maximum exhaust flow rate. The results for the ORC and T/C systems indicated a 4.8% and 2.3% total average reduction in BSFC and also maximum thermal efficiencies of 8% and 10%, respectively. Unlike the ORC system, the T/C system was modelled as a secondary turbine arrangement, instead of an independent unit. This in turn deteriorated BSFC by 5.5%, mostly during low speed operation, due to the increased exhaust backpressure. It was further concluded that the T/C system performed superiorly to the ORC counterpart during top end engine speeds, however. The ORC presented a balanced and consistent operation across the engines speed and load range.
Highlights
In recent years, the growing worldwide population and industrial development has seen an increasing demand in energy
This study aims to identify which of the two adopted identify which of the two adopted waste heat recovery (WHR) methods (ORC and T/C) performs in a better manner in WHR methods (ORC and T/C) performs in a better manner in terms of improving engine thermal terms of improving engine thermal efficiency and brake specific fuel consumption (BSFC) by means of 1-D engine simulation software
This section will provide a thorough disadvantages of integrated T/C and Organic Rankine Cycle (ORC) systems
Summary
The growing worldwide population and industrial development has seen an increasing demand in energy. The internal combustion engine (ICE) has, by far, grown to be the most popular means of transport since the second half of the 20th century. ICE will only manage to convert approximately 30–35% of the total provided chemical energy into effective mechanical work, as illustrated in Figure 1 [1,2,3,4,5,6]. Energies 2019, 12, 1397; doi:10.3390/en12071397 www.mdpi.com/journal/energies Figure. 1. Variation total energy content in ICE. 1. Variation total fuelfuel energy content in ICE
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.