Modeling the uniaxial rate and temperature dependent behavior of amorphous and semicrystalline polymers

Abstract

AbstractStrain rate and temperature dependent constitutive equations are proposed for polymer materials based on existing isotropic formulations of viscoplasticity. The proposed formulations are capable of simulating some of the important features of deformation behavior of amorphous and semicrystalline polymers. The materials model is based on the assumption that the evolution of flow stress is dependent on the rate of deformation, temperature, and an appropriate set of internal variables. The proposed theory is capable of modeling yielding, strain softening, and the orientation hardening exhibited by amorphous polymers. It is also possible to model the initial viscoplastic and subsequent nonlinear hardening behavior shown by semicrystalline polymers at large strains. Uniaxial tensile tests with uniform and hourglass specimens are made at temperatures ranging from 23 to 100°C and under various crosshead speeds. Both amorphous polycarbonate and semicrystalline polypropylene sheet materials are tested to characterize the stress and strain behavior of these materials and to determine their appropriate material constants. Load relaxation experiments are also conducted to obtain the necessary material constants describing the rate and temperature dependent flow stress behavior of polypropylene. Simulation results compare favorably against experimental data for these polymer materials.