Abstract
A multiscale thermomechanical model for a simplified Type-3 cryogenic, compressed-hydrogen (H2) storage vessel is described in this paper. The model accounts for the temperature-dependent elastic-plastic behavior of the vessel's carbon/epoxy composite overwrap and aluminum alloy liner. The homogenized thermo-elastic-plastic behavior for the individual laminae of the vessel layup is obtained using an incremental Eshelby-Mori-Tanaka approach associated with a micromechanical failure criterion to predict laminar failure while a standard elastic-plastic constitutive model is used to describe the behavior of the typical aluminum alloy assumed for the liner. The vessel's response to external loadings is modeled using a finite element method. Four loading scenarios, representing four thermomechanical cycles applied to the vessel, are analyzed to evaluate constituent and laminar stresses as well as the associated failure criterion during the cycle according to these scenarios. The model can provide helpful guidance to mitigate thermal stresses by selecting a suitable loading scenario, optimizing the layup, and tailoring the thermomechanical properties of the resin matrix.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
