Modeling tensile strength of materials processed by accumulative roll bonding

Abstract

Nanostructured materials are a relatively new class of materials that exhibit advanced mechanical properties, thus improving performance and capabilities of products, with potential applications in the automotive, aerospace and defense industries. Among the severe plastic deformation (SPD) methods currently used for achieving nanoscale structures, accumulative roll bonding (ARB) is the most favorable method to produce grain refinement for continuous production of metallic sheets at a bulk scale.In this article, a model that describes the evolution of material strength due to processing via accumulative roll bonding was developed. ARB experiments were conducted on CP-Ti Grade 2 at a selected set of conditions. The results showed significant grain refinement in the microstructure (down to ∼120nm) and a two-fold increase in tensile strength as compared to the as-received material. The developed model was validated using the experimental data, and exhibited a good fit over the entire range of ARB processing cycles. To further validate the model and ensure its robustness for a wider array of materials (beyond CP-Ti), a review of efforts on ARB processing was carried out for five other materials with different initial microstructures, mechanical properties, and even crystalline structures. The model was still able to capture the strengthening trends in all considered materials.