Modeling pipe-soil interaction under vertical downward relative offset using B-spline material point method

Abstract

To analyze the pipeline response under permanent ground deformation, the evolution of resistance acting on the pipe during the vertical downward offset is an essential ingredient. However, the efficient simulation of pipe penetration into soil is challenging for the conventional finite element (FE) method due to the large deformation of the surrounding soils. In this study, the B-spline material point method (MPM) is employed to investigate the pipe-soil interaction during the downward movement of rigid pipes buried in medium and dense sand. To describe the density- and stress-dependent behaviors of sand, the J2-deformation type model with state-dependent dilatancy is adopted. The effectiveness of the model is demonstrated by element tests and biaxial compression tests. Afterwards, the pipe penetration process is simulated, and the numerical outcomes are compared with the physical model tests. The effects of pipe size and burial depth are investigated with an emphasis on the mobilization of the soil resistance and the failure mechanisms. The simulation results indicate that the bearing capacity formulas given in the guidelines can provide essentially reasonable estimates for the ultimate force acting on buried pipes, and the recommended value of yield displacement may be underestimated to a certain extent.