Modeling of Viscoelasticity of Thermoplastic Polymers Employed in the Hot Embossing Process

Abstract

AbstractThe manufacturing of micro-scale components requires mastery of shaping processes ranging from micromechanics to electronic microfabrication. The hot embossing (HE) process is widely developed in various fields, since it allows to emboss complex structures at the micro/nanoscale such as optical sensors, diffractive lenses, microfluidic channels, and so on. The development of micro-structured parts via this process requires an in-depth analysis of the surface quality obtained and the mold filling rate. It is essential to analyze the influence of polymer properties to optimize the final mold filling to reduce cycle time and obtain defect-free replicated components. In this research, compression tests were carried out with poly(methyl methacrylate) (PMMA) and polycarbonate (PC), at different forming temperatures to determine their behavior law properties. Numerical simulation of the polymer forming processing was carried out by using Abaqus finite element software, taking into account the mechanical properties of both polymers and the characteristics of microchannels. The aim was to analyze the effect of the elastic–viscoplastic properties of the materials on the mold filling rate at different temperatures. Numerical simulation of the HE process with PMMA shows that the mold cavity is completely filled with elastic-viscoplastic behaviors, and the filling rate increases as a function of mold displacement. On the other hand, for PC, the embossed temperature has an influence on the filling ratio of the mold.