Abstract
This paper reports thermodynamic properties and phase equilibria in the iron-phosphorus-carbon system for developing a technology for smelting ferrophosphorus as well as for utilizing them in the processes of phosphorus-alloying of metals. According to the results of thermodynamic calculations, we plotted a ternary Fe–P–C phase equilibrium diagram (liquidus surface) in the form of graphical dependences, which indicate the concentration fields of phase coexistence. The results of simulation allowed finding out five nonvariant points, three of which are new: E1 eutectic (teutectic=12170С), U1 peritectic (tperitectic=10950С), and Е3 eutectic (teutectic=3380С). The experimental studies of the phase composition of ferrophosphorus showed that the phosphorus microstructure is represented by Fe3P phosphide, Fe3C carbide, and carbophosphide eutectic. We carried out the thermodynamic calculation of the temperature-concentration ranges of phase stability in the Fe–P–C system that are at equilibrium with the smelts of both the carbon solid solutions and phosphorus ones in - and -iron, FeP, Fe2P, Fe3P phosphides, and graphite. In this study, three previously unknown nonvariant equilibria have been determined: a eutectic equilibrium at 1216.580C; a peritectic one with a transformation point at 1095.190C; and a eutectic one at a temperature of 337.510C. In experiments, we obtained an equilibrium concentration of carbon which decreases in the Fe–P–C system when the content of phosphorus increases. The research findings largely reveal special features of preparation of ferrophosphorus by carbon reduction of phosphorites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.