Abstract
The flow behavior of a semi-solid A356 alloy at high solid fraction was studied. The mushy zone was considered as an effective two-phase, so that the solid continuum can be compressible porous media, and the liquid phase interaction with the solid skeleton was of Darcy type. The semi-solid flow through the upsetting test was modeled in ABAQUS finite element method software. The Gurson yield criterion has been developed for the modeling process of the flow behavior of solid porous medium. Specimens were globulized by a thermomechanical process and then were tested for various percentages of upsetting. The distribution of solid fraction along the radius of the specimens at different height reduction showed a good correlation with model prediction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have