Abstract
Radiation damage of the silicon detectors in future hadron colliders poses a major challenge for its reliable operation. It is crucial to investigate the neutron-induced radiation damage owing to its large flux in the calorimeters and the trackers. Measurement results on irradiated detectors are complemented by modeling for getting a deep insight into the device behavior. This work presents the development of neutron-induced radiation damage model in silicon detectors using TCAD simulation. A wide spectrum of measurement results available on neutron-irradiated silicon detectors, viz. full depletion voltage, leakage current, charge collection, and effective trapping times, helps in constraining the model parameters, resulting in a robust model for neutron damage. Modeling has been performed within the phase-space of the measurements, i.e. for different initial bulk resistivities, active thicknesses and for both polarities up to the fluence values of 9 × 1014 1 MeV neq cm−2 (where, 1 MeV neq refers to the equivalent fluence for monoenergetic neutrons of energy 1 MeV) and for two measurement temperatures, 253 and 263 K. The results obtained from the devised neutron damage model show a good agreement with the measurement results.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
