Modeling of facesheet crack growth in titanium–graphite hybrid laminates. Part II: Experimental results

Abstract

Titanium–graphite hybrid composite laminates exhibit a coupled damage growth mode of facesheet cracking and delamination. Part I of this work modeled the growth of the coupled damage mode. Fatigue experiments were conducted on single edge notch tension specimens to measure the crack growth rate. This paper compares the model predictions with experimental data. The three-dimensional finite element model successfully captured the damage growth behavior for two of the lay-ups ([Ti/0/90/0 2] s and [Ti/90/0/90 2] s) in the experimental program. However, in a third lay-up, [Ti/0/90/±30] s, the underlying damage modes were found to be sufficiently different than the other two lay-ups and the model did not capture the steady-state growth behavior. The effects of temperature and specimen size were also investigated for TiGr laminates. Except for the effects of the load ratio, elevated temperatures did not affect the crack growth rate significantly. For wider specimens, the steady-state fatigue crack growth behavior was similar to the narrow specimens, indicating that the steady-state facesheet crack growth behavior is independent of specimen size.