Abstract
The aim of this work is to carry out molecular dynamics simulation of the uniaxial stretching of a cooled Al/Cu composition. The LAMMPS software package has been used for calculations, which includes the classic molecular dynamics code with an emphasis on modeling materials. The Ovito program has been used for visualization, which has a large number of functions, so that the user can thoroughly investigate the results obtained. When describing the interatomic interaction in the Al/Cu nanocomposite, we used the potential of the embedded EAM atom. The choice of potential is due to the fact that it adequately describes and reproduces the properties of a wide class of materials, including metals, semiconductors and alloys. The simulation has been carried out in two stages. At the first stage, a sample consisting of two crystallites of aluminum and copper in the form of parallelepipeds, connected along one of the joint boundaries, was placed in the computational domain and cooled at constant pressure. Cooling was carried out to stabilize the nanosystem. At the second stage, corresponding to the deformation, the temperature and pressure were changed in accordance with the ongoing physical processes. The algorithm of the thermostat and the Nose – Hoover barostat has been used to control the temperature and pressure at the initial stage of cooling. The paper demonstrates the nature of the distribution of longitudinal stresses over the entire volume of the crystal in the process of stretching. When the sample reached the elastic limit, the nucleation of crystal lattice defects and their distribution over the crystal in the form of shifts and rotations of atoms in crystal planes were observed. Areas of plastic deformation origin have been determined. The maximum destruction of the material occurred along the interface. The parameters of the Al/Cu composition (deformation, temperature, mechanical stress) have been dynamically investigated using molecular dynamics simulation. Comparison of the characteristics of the sample in the deformation process has been carried. Under loading conditions, a variety of processes are implemented in the material, including generation of defects, elastic and plastic deformation, generation of damage, and mechanical mixing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.