Abstract
The combination of solar thermal and heat pump systems as a single solar assisted heat pump (SAHP) system can significantly reduce residential energy consumption in Canada. As a part of Team Ontario's efforts to develop a high performance house for the U.S. Department of Energy's Solar Decathlon 2013 Competition, an integrated mechanical system (IMS) consisting of a SAHP was investigated. The system was designed to provide domestic hot water (DHW), space-heating, space-cooling, and dehumidification. The system included a cold and a hot thermal storage tanks and a heat pump to move energy from the low temperature reservoir to the hot reservoir. Solar thermal collectors supplied heat to the cold storage and operated at a higher efficiency due to the heat pump reducing the temperature of the collector working fluid. The combination of the heat pump and solar thermal collectors allows more heat to be harvested at a lower temperature, and then boosted to a suitable temperature for domestic use via the heat pump. The IMS and the building's energy loads were modeled using the TRNSYS simulation software. A parametric study was conducted to optimize the control, sizing, and configuration of the system. The simulation results suggested that the investigated system can achieve a free energy ratio (FER) of about 0.583 for the high performance house designed for the Ottawa climate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
