Abstract
This paper presents a theoretical assessment of energy, exergy, and syngas cleaning performances in a biomass gasification combined heat and power (CHP) plant with varying operating parameters. The analysis is carried out using a detailed model of a biomass gasification CHP plant developed with Aspen Plus. The model describes: wood drying and gasification in a dual fluidized bed (DFB) reactor, syngas cleaning, as well as combustion in a gas engine for electricity production. Heat is recovered from the CHP system for internal needs and for district and domestic water heating. An accurate prediction of tar and inorganic contaminants is developed for proper modeling of syngas cleaning efficiency. The influence of wood moisture content, drying conditions, flow rate of the sand circulating in the DFB reactor, catalyst and scrubbing agent efficiencies, as well as additional electricity production through steam turbine on the overall process performances is studied. On the basis of the comparative analysis of ni...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have