Modeling liquefaction of water saturated granular material under undrained cyclic shearing

Abstract

The tendency of particles in a water-saturated granular mass to re-arrange into a denser state during cyclic shearing under pressure results in an increase in pore water pressure. The increase in the pore water pressure causes a reduction in the inner particle contact forces, and in turn easier re-arrangement of the particles. Eventually, the material loses its shear strength, partially or almost completely. In this paper, a general three-dimensional continuum mechanics model is presented for the deformation of granular materials. A physically based model is also presented for characterization of liquefaction of the water saturated granular material under undrained cyclic shearing. The model incorporates the fabric of the granular mass, which develops as the frictional granular mass is deformed in shear. It includes the coupling between shearing and excess pore water pressure. The model parameters are estimated, based on the results of cyclic shearing experiments on large hollow cylindrical samples of silica sand. Basically, the calculation results utilizing this model can embody liquefaction phenomena of the water saturated granular material under undrained cyclic shearing.