Modeling internal temperature changes of timber poles during ACA treatment

Abstract

The temperature-time-location relationships during steam conditioning and pressure treatment of timber poles using ammoniacal copper arsenate (ACA) have been studied and a new mathematical model that incorporates both the thermal properties of the poles and the parameters of the treatment process is discussed. Prediction equations and charts are presented that show the minimum required steaming time to satisfy the 1982 Rural Electrification Authority (REA) purchase specification, i.e. a center temperature above 150 °F (65.5 °C) for 2 hours. A six hour steaming time, commonly used for ACA treatment, has been found to be too short to bring poles with diameters larger than about 40 cm to the required sterilization conditions. Therefore longer steaming times, predicted using the methods given here, are recommended. The temperature of the preservative used does not appear to be a major factor in determining the maximum temperature achieved at the center of a pole, but it can influence the length of time the pole is above 65.5 °C.