Abstract
MODELING INFILTRATION KINETICS OF LIQUIDS INTO POROUS ALUMINA PREFORMS . Alpha-alumina preform was infiltrated with different infiltrant and pressure for studying the infiltration kinetic. Effects of pre-sintering temperature, type of infiltrant, pressure and multiple infiltrations on the rate of infiltration into porous alumina preforms were described. The pore radius of alumina preform is calculated based on the preform water system by using Washburn model. The pore radius from this model, r of 0.0147 μm is good agreement to the average pore radius found by using mercury porosity measurement, r of 0.0170 μm. The pore radius of 0.0147 μm is used to calculate the rate of infiltration, k. The k factors are 64.83 x 10 -5 ms ½ and 27.11 x 10 -5 ms ½ for water and TiCl 3 respectively without involving pressure in the calculation. On the other hand, by using pressure, the k factors are 75.14 x 10 -5 ms ½ and 31.40 x 10 -5 ms ½ for water and TiCl 3 respectively. Other formulas were also included as comparisons. The kinetic of water and titanium trichloride alumina preform system is parabolic in time or linier in square root of time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
