Abstract
A full-scale model was developed to find optimal design parameters for osmotic membrane bioreactor (OMBR) and reverse osmosis (RO) hybrid system for wastewater reclamation. The model simulates salt accumulation, draw solution dilution and water flux in OMBR with sludge concentrator for high retention and low salt concentration factor. The full-scale OMBR simulation results reveal that flat-sheet module with spacers exhibits slightly higher flux than hollow-fiber; forward osmosis (FO) membrane with high water permeability, low salt permeability, and low resistance to salt diffusion shows high water flux; an optimal water recovery around 50% ensures high flux and no adverse effect on microbial activity; and FO membrane cost decreases and RO energy consumption and product water concentration increases at higher DS flow rates and concentrations. The simulated FO water flux and RO energy consumption ranges from 3.03 to 13.76LMH and 0.35 to 1.39kWh/m3, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
