Modeling anisotropic magnetic hysteresis properties with vector stop model by using finite element method

Abstract

PurposeThis paper aims to use a history-dependent vector stop hysteresis model incorporated into a two dimensional finite elements (FE) simulation environment to solve the magnetic field problems in electrical machines. The vector stop hysteresis model is valid for representing the anisotropic magnetization characteristics of electrical steel sheets. Comparisons of the simulated results with measurements show that the model is well appropriate for the simulation of electrical machines with alternating, rotating and harmonic magnetic flux densities.Design/methodology/approachThe anisotropy of the permeability of an electrical steel sheet can be represented by integrating anhysteretic surfaces into the elastic element of a vector hysteresis stop model. The parameters of the vector stop hysteresis model were identified by minimizing the errors between the simulated results and measurements. In this paper, a damped Newton method is applied to solve the nonlinear problem, which ensures a robust convergence of the finite elements simulation with vector stop hysteresis model.FindingsAnalyzing the measurements of the electrical steel sheets sample obtained from a rotational single sheet tester shows the importance to consider the anisotropic and saturation behavior of the material. Comparing the calculated and measured data corroborates the hypothesis that the presented energy-based vector stop hysteresis model is able to represent these magnetic properties appropriately. To ensure a unique way of hysteresis loops during finite elements simulation, the memory of the vector stop hysteresis model from last time step is kept unchanged during the Newton iterations.Originality/valueThe results of this work demonstrates that the presented vector hysteresis stop model allows simulation of vector hysteresis effects of electrical steel sheets in electrical machines with a limited amount of measurements. The essential properties of the electrical steel sheets, such as phase shifts, the anisotropy of magnetizations and the magnetization characteristics by alternating, rotating, harmonic magnetization types, can be accurately represented.