Modeling anisotropic ductile fracture of AA7075-T6 sheet for sheet metal forming considering anisotropic stress state

Abstract

Anisotropic ductile fracture is one of the critical issues in the precision plastic forming of lightweight sheet metals. In this work, a new anisotropic ductile fracture model is developed by introducing the anisotropic stress triaxiality into the weight equation of the shear-controlled ductile fracture criterion. In an attempt to consider the effect of material anisotropy on stress state, the proposed fracture model is constructed in the anisotropic stress state form. The proposed anisotropic fracture model is used to characterize the anisotropic ductile fracture behavior of the AA7075-T6 sheet with a thickness of 2.0 mm under various stress states at room temperature. A series of uniaxial tensile tests are conducted using the in-plane shear specimen, the specimen with a central hole, and the plane strain grooved specimen to experimentally investigate the ductile fracture of AA7075-T6 along rolling, diagonal, and transverse directions. The proposed fracture model is calibrated by fracture strains determined from the hybrid experimental–numerical approach. With the calibrated fracture model, the anisotropic ductile fracture behaviors of AA7075-T6 over a wide range of stress states are predicted and compared with experimental measurements. The results show that the proposed fracture model successfully captures the anisotropic ductile fracture behavior of AA7075-T6 under various stress states at room temperature. Furthermore, to further illustrate the fracture predictive capability of the proposed fracture model, the predicted anisotropic fracture forming limit diagram is compared with the experimental forming limit strains obtained from the literature. Reasonable agreement is shown between literature data points and predicted fracture forming limit diagram. Accordingly, the proposed model has a great advantage in quantitative characterizing the anisotropic ductile fracture of high-strength aluminum alloy sheets under various loading conditions.