Modeling and prototyping of a soft closed-chain modular gripper

Abstract

PurposeThis paper aims to present a soft closed-chain modular gripper for robotic pick-and-place applications. The proposed biomimetic gripper design is inspired by the Fin Ray effect, derived from fish fins physiology. It is composed of three axisymmetric fingers, actuated with a single actuator. Each finger has a modular under-actuated closed-chain structure. The finger structure is compliant in contact normal direction, with stiff crossbeams reorienting to help the finger structure conform around objects.Design/methodology/approachStarting with the design and development of the proposed gripper, a consequent mathematical representation consisting of closed-chain forward and inverse kinematics is detailed. The proposed mathematical framework is validated through the finite element modeling simulations. Additionally, a set of experiments was conducted to compare the simulated and prototype finger trajectories, as well as to assess qualitative grasping ability.FindingsKey Findings are the presented mathematical model for closed-loop chain mechanisms, as well as design and optimization guidelines to develop controlled closed-chain grippers.Research limitations/implicationsThe proposed methodology and mathematical model could be taken as a fundamental modular base block to explore similar distributed degrees of freedom (DOF) closed-chain manipulators and grippers. The enhanced kinematic model contributes to optimized dynamics and control of soft closed-chain grasping mechanisms.Practical implicationsThe approach is aimed to improve the development of soft grippers that are required to grasp complex objects found in human–robot cooperation and collaborative robot (cobot) applications.Originality/valueThe proposed closed-chain mathematical framework is based on distributed DOFs instead of the conventional lumped joint approach. This is to better optimize and understand the kinematics of soft robotic mechanisms.