Abstract
An integrated solar water splitting device based on thin film silicon multijunction photocathodes is presented. A graphical representation of the photovoltaic current–voltage data is introduced which allows for an estimation of the maximum achievable solar‐to‐hydrogen efficiency of the integrated device. Furthermore, a simple yet very useful series circuit model is used to predict the photoelectrochemical performance of the integrated device in a more elaborate way when the j–V characteristics of the individual components are known. Within the model, the j–V characteristics of each component can be either modeled with parameters from the literature or measured. The photocathode, the electrolyte concentration, and the hydrogen and oxygen evolving catalysts were varied exemplarily and the impact of each component on the integrated device performance was evaluated. A maximum solar‐to‐hydrogen efficiency of 9.5% was found using a triple junction solar cell functionalized with a Pt catalyst for the hydrogen evolution and a RuO2 catalyst for the oxygen evolution reaction in a 1 M KOH electrolyte. This result was confirmed experimentally and is compared to efficiencies reported in the literature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
