Modeling and Optimization Analysis for Base-Excited Magnetostrictive Vibration Harvester

Abstract

Due to the low vibration frequency and weak vibration energy in natural environment, the vibration energy harvester is faced with the problem of low power and low adaptability and becoming particularly difficult in actual conditions. It is necessary to improve the harvesting capacity and efficiency by optimizing the parameters of the harvester, making full use of the energy of low and unstable atmospheric vibrations. In this paper, a mathematical model is established for the cantilever magnetostrictive vibration harvester under the base excitation, including the mechanical deformation of the composite beam, and the electromagnetic results produced thereof. The mechanical-magneticelectric energy conversion relationship is duly taken into account. The additional weight, coil parameters, external resistance and other parameters of the harvester are optimized and analyzed through numerical simulation. In addition, the theoretical results are analyzed and discussed via comparison with experiments. Finally, the effects of the above factors are assessed, which allows us to obtain the optimal winding length, number of turns of the coil, and optimal tip additional mass. The experiment result shows that the optimized magnetostrictive harvester can output 12.07[Formula: see text]mW power to the external resistor under the condition of 1[Formula: see text]g acceleration mechanical vibration, with normalized power density reaching 40.2[Formula: see text]mW/cm3/g. Moreover, the optimized magnetostrictive harvester can successfully supply power for the LED display screen of the temperature sensor and a low-power thermometer.