Abstract
The purpose of this study was to investigate quantitatively by measurement and modeling the variations in CT number distributions of mobile targets in cone‐beam CT (CBCT) imaging. CBCT images were acquired for three targets manufactured from homogenous water‐equivalent gel that was inserted into a commercial mobile thorax phantom. The phantom moved with a controlled cyclic motion in one‐dimension along the superior–inferior direction to simulate patient respiratory motion. Profiles of the CT number distributions of the static and mobile targets were obtained using CBCT images. A mathematical model was developed that predicted the variations in CT number distributions and their dependence on the motion parameters of targets moving in one‐dimension using CBCT imaging. The measured CT number distributions for the mobile targets varied considerably, depending on the motion parameters. The extension of the CT number distribution increased linearly with motion amplitude where maximum target elongation reached twice the motion amplitude. The CT number levels of the mobile targets were smeared over a longer distribution; for example, the CT number level for the 20 mm target dropped by nearly 30% at motion amplitude (A) equal to 20 mm in comparison with the CT number distribution of stationary targets. Frequency of motion played an important role in spatial and level variations of the CT number distributions. For example, the level of the CT number profile for the medium target (20 mm) decreased evenly by nearly 50% at A=20 mm with high motion frequencies. Motion phase did not affect the CT number distributions for prolonged projection acquisition that included several respiratory cycles. The mathematical model of the CT number distributions of mobile targets in CBCT reproduced well the measured CT number distributions and predicted their dependence on the target size and phantom motion parameters such as speed, amplitude, frequency, and phase. The CT number distributions varied considerably with motion in CBCT. A motion model of CT number distribution for mobile targets has been developed in this work that predicted well the variations in the measured CT number profiles and their dependence on motion parameters. The model corrected the CT number distribution retrospective to CT image reconstruction where it used a first‐order linear relationship between the number of projections collected in the imaging window of a mobile voxel to obtain the cumulative CT number. This model provides quantitative characterization of motion artifacts on CT number distributions in CBCT that is useful to determine the validity of CT numbers and the accuracy of localization and volume measurement of tumors in diagnostic imaging and interventional applications, such as radiotherapy.PACS number: 87.57.C‐
Highlights
CT imaging plays an essential role in the diagnosis of various diseases, including cancer, where it provides a valuable tool in screening and staging of various cancers.[1,2,3] In radiotherapy, CT imaging has a paramount role where the tumor and critical structures are usually outlined in the treatment planning process.[4,5] patient motion degrades the quality of CT images.[6,7,8] Different techniques were introduced to handle motion artifacts in CT imaging
Cone-beam computed tomographic imaging (CBCT) provides a robust tool for volumetric tomography using high resolution and sensitive flat-panel detectors.[17,18] An X-ray source provides three-dimensional cone beams that are detected with a large effective imaging area using flat-panel detectors[18] or multiple detector arrays.[19,20] In CBCT, the projections are acquired by rotating the imaging gantry around the patient to obtain different angular views to reconstruct volumetric images of the patient.[21]. Over the last decade, interventional applications of CBCT have grown, where increasing number of radiation therapy machines are being equipped with kV on-board imaging (OBI) systems that can provide planar radiographic imaging, volumetric CT imaging, and fluoroscopy.[22]. The OBI has become a vital clinical tool to perform image-guided radiation therapy (IGRT)
The CT numbers broadened over larger volume and the CT number level decreased with the increase in the extension of the CT number distributions, the total cumulative CT number over the broadening range was preserved, as predicted by Eq [5] as long as the target is in the imaging view during CBCT scanning
Summary
CT imaging plays an essential role in the diagnosis of various diseases, including cancer, where it provides a valuable tool in screening and staging of various cancers.[1,2,3] In radiotherapy, CT imaging has a paramount role where the tumor and critical structures are usually outlined in the treatment planning process.[4,5] patient motion degrades the quality of CT images.[6,7,8] Different techniques were introduced to handle motion artifacts in CT imaging These techniques include rapid gantry rotations combined with multislice technology to achieve shorter scanning with less motion artifacts[9,10] and correction of motion artifacts in the projections[11,12] before image reconstruction, where the trajectory of a mobile object is remapped back to the stationary positions. The measured distributions of the CT numbers of the stationary and mobile targets were employed to develop a mathematical model that predicts quantitatively the motion effects on the CBCT number distributions
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
