Modeling and coordinate control of photovoltaic DC building module based BIPV system

Abstract

► The modeling method for PV dc building module based BIPV system is presented. ► The coordinate control strategy for PV-DCBM based BIPV system is presented. ► The accurate small-signal model of the PV-DCBM based BIPV system is built. This paper presents the modeling method and coordinate control strategy for photovoltaic dc building module (PV-DCBM) based building integrated photovoltaic (BIPV) system. The PV-DCBM based BIPV system consists of plenty of PV-DCBMs and a centralized inverter which are coupled to the common dc bus in parallel. Each PV-DCBM is integrated with a PV building material to extract maximum power from it and then a centralized inverter is used to transfer the power to the grid. The PV-DCBM based BIPV system has some significant advantages for building integrated applications, such as individual MPPT, inherent data monitor, low cost and excellent expandability. A coordinate control strategy based on energy balance of the PV-DCBM based BIPV system is proposed to realize the individual control for each PV-DCBM and the centralized inverter. The accurate small-signal model of the PV-DCBM based BIPV system is built based on the proposed operation principle and a detailed design approach of the coordinate controller is proposed. Experimental results on the laboratory prototype verify the validity of the proposed modeling and coordinate control method.