Modeling and control of a Pneumatic-Electric hybrid system

Abstract

We introduce our Pneumatic-Electric (PE) hybrid actuator model and propose to use the model to derive a controller for the hybrid actuation system by an optimal control method. Our PE hybrid actuator is composed of Pneumatic Artificial Muscle (PAM) and an electric motor. The PE hybrid actuator is light and can generate large torque. These properties are desirable for assistive devices such as exoskeleton robots. However, to maximally take advantage of PE hybrid system, we need to reasonably distribute necessary torque to these redundant actuators by properly taking distinctive characteristics of a pneumatic actuator and an electric motor into account. To do this, in this study, we use an optimal control method called iterative LQG to reasonably distribute the necessary torque to the PAM and the electric motor. The crucial issue to apply the optimal control method to the PE hybrid system is PAM modeling. We built a PAM model composed of three elements: 1) an (air)pressure-force conversion model, 2) a contraction rate model, 3) time delay of the air valve, and 4) the upper limit of force generation that depends on the contraction rate and the movable range. We apply our proposed method to a one degree of freedom (one-DoF) arm with PE hybrid actuator. The one-DoF arm successfully swing tasks 0.5 Hz, 2 Hz and 4 Hz and swing up and stability task by reasonably distributing necessary torque to the two different actuators in a simulated and a real environments.