MODELING AND CALCULATION OF FATIGUE CRACK GROWTH LIFE IN STEELS

Abstract

In this work, we studied the kinetics of fatigue crack growth on compact steel tensile specimens (C (T)-type), in the middle section of crack growth diagram under regular and irregular loading with different asymmetries and maximum load. The crack growth kinetics was obtained by the authors experimentally on modern servo-hydraulic testing machine. Irregular loading was carried out using samples of standard loading spectra characteristic of various technical objects experiencing variable loading during operation. The values of the crack growth rate were obtained. Parameters that evaluate the character of irregular loading and crack closure, namely, irregularity factor and crack closure ratio were suggested. When calculating the effective value of the magnitude of the stress intensity factor (SIF) at the crack mouth, it is proposed to consider in addition to the closure coefficient and cracks also measure irregular loading. The fatigue crack growth life was predicted taking into account its “closure” and the nature of loading according to the approach proposed by the authors and the cyclic calculation method (cycle-by-cycle), all the data obtained are tabulated and distributed according to the type of loading. The results obtained showed good convergence of the calculated and experimental data, which confirms the high values of the correlation.