Abstract
Power line noise is known to affect the performance of broadband power-line communications significantly. This paper presents a frequency-domain approach to characterize and model the statistical variation of power-line noise. The model considers both the background noise and the impulsive noise. The background noise model is based on statistical analysis of the results from two long-term measurements of noise spectrum conducted at two separate sites of a laboratory and a residential apartment. On the other hand, the impulsive noise model is obtained by direct measurements from the noise sources (i.e., various electrical household appliances). The amount of impulse noise reaching a power-line communications (PLC) receiver can then be determined with consideration of the channel transfer characteristics between the noise sources and the PLC receiver. Using these noise models, the performance of two major classes of digital modulation schemes, namely single-carrier modulation and multicarrier modulation, are analyzed and compared. It is found that the multicarrier scheme performs better than the single-carrier scheme when subjected to the observed power-line noise with non-Gaussian statistics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.