Abstract
Effect of thermal exposure on FCG of Al-Cu-Mg alloys with low Cu/Mg ratio in artificial and natural ageing conditions were modeled and analyzed. Three FCG rate models, namely Collipriest, Priddle, and Modified Forman model were examined to research the effect of thermal exposure on FCG of Al-Cu-Mg alloys with low Cu/Mg ratio in artificial and natural ageing conditions. The results showed that Priddle model provided the best fit. Priddle model was used to fit FCG data of (a) 170°C/30min ageing; (b)170°C/30min ageing +100°C/2000h exposure; (c)T351 ageing+100°C/2000h exposure; (d)T351 ageing. The fitted results indicated that the FCP resistance can be increased by slight artificial aging, and artificial aging can delay the degradation of the fatigue properties
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
