Model-based design and optimization of a dielectric elastomer power take-off for oscillating wave surge energy converters

Abstract

This paper investigates a new kind of device for producing electricity from the mechanical energy carried by ocean waves. The proposed machine, named poly-surge, is based on an existing sea-bottom hinged surging-flap concept that is equipped with a new power take-off (PTO) system based on a novel soft dielectric elastomer (DE) transducer. DEs are highly deformable polymeric materials that can be used to conceive electrostatic generators relying on capacitance variation. This kind of generators shows a number of features that well match the requirements of a wave energy converter since they are light-weight, low-cost, tolerant to salty/aggressive marine environment, noise-free during operation, and easy to manufacture and install. The considered poly-surge converter employs a parallelogram-shaped DE generator (PS-DEG) arranged in a dual agonist–antagonist configuration, which makes it possible to provide the flap with controllable bidirectional torques. In this paper, first a complete wave-to-wire multiphysics model of the overall system is described that assumes a simplified hydrodynamic response for the hinged-flap and an electro-hyperelastic behaviour of the PS-DEG. Second, a procedure is presented for the dimensioning and optimization of the PS-DEG for given sets of poly-surge flap dimensions, wave-climate information and constraints on both design and operational variables. Finally, simulation results are provided to demonstrate that the poly-surge can achieve quasi-optimal power production with a properly designed agonist–antagonist DEG PTO system.