Abstract

In this paper, a self-triggering linear transformer driver (LTD) technology based on the principle of electromagnetic induction is presented. A detailed circuit model of the self-triggering LTD module is established in PSPICE to explore the feasibility of the self-triggering method. Through simulation and analysis, an original design of a prototype self-triggering LTD is established. Some factors, which influence the performance of the self-triggering LTD are demonstrated and analyzed thoroughly in this paper, such as peaks of induced trigger voltages and pre-magnetizing. Simulation results indicate that all induction cavities in the self-triggering LTD module can be triggered with an easier external trigger method and the cavity triggering sequence is acceptable. The peak current at the output of self-trigger LTD module is in the range of 0.96 MA to 1.01 MA and the 10-90% rise time is about 31ns in the simulation.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.