Abstract
One of the most challenging aspects of reliability testing in the telecommunication industry is earthquake resistance testing. Cabinet systems, battery racks, equipment racks, and distribution frames are considered compliant with Network Equipment-Building System (NEBSTM) criteria for surviving earthquake conditions if test results indicate (1) the maximum deflection of the top of the structure does not exceed 7.6 cm (3 in.), (2) there are no permanent deformations or structural damage, and (3) the equipment or batteries remain functional (as defined in NEBS Requirements: Physical Protection, Specification GR-73 Issue 2). Based on seismic test results of a large population of telecom enclosures, it is accepted that a system always passes the seismic test if its fundamental natural frequency is at least 6 Hz. It is costly to produce and configure enclosures and conduct seismic qualification testing. To minimize the risk of telecom system failure, a modal finite element analysis (FEA) of the system should first be performed. Numerical results of the FEA should then be verified with experimental resonance search data generated by modal testing or sine sweep testing, combined with static pull testing where applicable. The resonance search results will determine the need for seismic testing (seismic analysis) prior to seismic qualification testing. This paper elaborates on key aspects of the static pull test method supported by the test results for a cabinet framework and a configured cabinet relative to the seismic test results. The paper also discusses sine sweep testing of a battery cabinet and results of two modal test methods used on the corresponding battery rack. Finally, this paper describes modal FEA of the same battery rack anchored to a concrete pad supported by a polystyrene plastic foam sheet and explains the correlation of the numerical results with the experimental modal analysis results. The correlated model serves as the baseline model for analyzing other battery racks and equipment cabinets configured with batteries.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
