Mobile Robot Localization and Map Building for a Nonholonomic Mobile Robot

Abstract

Mobile robot localization and map building are very important for a mobile robot to perform a navigation-based service task to aid the aged or disabled in an indoor environment (office, facilities or at home). In order to enable mobile robot to perform service tasks autonomously, the information of environment in which the mobile robot moves is needed. To obtain the accurate map, many different sensors system and techniques have been developed. Approaches of mapping can roughly be classified according to the kind of sensor data processed and the matching algorithms [S. Thrun et al., 1996, 1998, 2000, 2004; Chong, K.S et al., 1996; C.-C. Wang et al., 2002; G. Dissanayake et al., 2000; B. barshan et al., 1995; Weimin Shen et al., 2005]. In this paper, we proposed a method of map building using interactive GUI for a mobile robot. The reason we proposed this method is that it is difficult for a mobile robot to generate an accurate map although many kinds of sensors are used. The proposed method enables the operator to modify map built by sensors, compared with the real-time video from web camera by using modification tool in interactive GUI. Laser Range Finder (LRF) was used to get the information of the environment in which mobile robot moving. In order to improve self-localization of mobile robot, Extended Kalman Filter (EKF) was introduced. By the results of simulation and experiments, the developed EKF is effective in self-localization of mobile robot. This paper introduces the architecture of the system and gives some experimental results to verify the effectiveness of the developed system. The rest of the paper consists of 5 sections. Section 2 describes the structure of the proposed system. Section 3 presents the developed algorithm of self-localization of mobile robot and gives some simulation and experimental results to verify the effectiveness of the EKF in improving precision of positioning of mobile robot. Section 4 details the developed LRF data processing algorithm. Section 5 introduces the developed interactive GUI. The experimental results are given in Section 6. Section 7 concludes the paper. 13