Abstract
The slow response time of planar Liquid Crystal (LC)-based phase-shift metasurface and Reconfigurable Intelligent Surfaces (RIS) cells is addressed in this paper by introducing a polymer network LC (PNLC) mixture suitable at mm-wave bands. Since the conventional effective isotropic model used in optical cells for describing the PNLC is not suitable in RF, an effective anisotropic and uniaxial model for such mixture is provided and experimentally validated at 100 GHz for the first time. In order to compare the temporal performance and tunability of the PNLC, transmissive and reflective cells, containing conventional LC and PNLC, have been manufactured and measured at optical and mm-wave frequencies. The temporal responses of PNLC are also compared for both RF and optical cells, obtaining relevant differences between their improvement factors, which are also discussed. Specifically, a 50 fold response time improvement is attained in cells designed to work at 100 GHz, although at the expense of a 3X tunability reduction. The model, which is robust to varying angle of incidence and cell dimensions, has been experimentally validated by designing and manufacturing a PNLC reflectarray cell of a different geometry. The cell shows reconfigurability times of 210ms, representing a significant improvement with respect to state-of-the-art response time in mm-wave cells, which are in the order of several seconds.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.