MMSE Based Transceiver Designs in Closed-Loop Non-Regenerative MIMO Relaying Systems

Abstract

In this paper, we propose a new design strategy based on the minimum mean-squared error (MMSE) in closed-loop non-regenerative multiple-input multiple-output relaying systems. Instead of conventional singular value decomposition based methods, we address the problem for joint MMSE design in a different approach using the Wiener filter solution which leads to simple derivations of the optimal MMSE designs. First, allowing the channel state information (CSI) at the source, we provide a new closed form solution for a source-relay-destination joint MMSE design by extending existing relay-destination joint MMSE designs. Second, for the limited feedback scenario, we address a codebook design criteria for the multiple streams preceding design with respect to the MMSE criterion. From our design strategy, we observe that compared to conventional non-regenerative relaying systems, the source or the destination only needs to know the CSI corresponding to its own link such as the source-to-relay or the relay-to-destination in view of the MMSE. Simulation results show that the proposed design gives about 7.5 dB gains at a bit error rate of 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-4</sup> over existing relay-destination joint MMSE schemes and we can get close to the optimal unquantized schemes with only a few feedback bits.