Mixing Measurements in a Supersonic Expansion-Ramp Combustor

Abstract

This paper reports results on molecular mixing for injection via an expansion-ramp into a supersonic freestream with M 1 = 1.5. This geometry produces a compressible turbulent shear layer between an upper, high-speed “air” stream and a lower, low-speed “fuel” stream, injected through an expansion-ramp at α = 30° to the high-speed freestream. Mass injection is chosen to force the shear layer to attach to the lower guide wall. This results in part of the flow being directed upstream, forming a recirculation zone. Employing the hypergolic hydrogen-fluorine chemical reaction and pairs of “flip” experiments, molecular mixing is quantified by measuring the resulting temperature rise. Initial experiments established the fast-chemistry limit for this flow in terms of a Damkohler number (Da). For Da ≥ 1.4, molecularly mixed fluid effectively reacts to completion. Parameters varied in these experiments were the measurement station location, the injection velocity of the (lower) “fuel” stream, the stoichiometry for the flip experiments, and the density ratio of the fuel and air streams. As expected, mixing increases with increasing distance from the injection surface. The mixed fluid fraction increases by 12% when changing the fuel-to-air stream density ratio from 1 to 0.2. Comparisons with measurements at subsonic (high-speed) “air” stream velocities show that the trend of decreasing mixing with increasing speed documented in free-shear layer flows is also encountered in these flows. The current geometry produces higher mixing levels than do free shear layers.