Abstract
The objective of this study was to assess the mixing performance of a horizontal paddle blender for mono-disperse and bi-disperse particles. The assessment was performed through the application of the Discrete Element Method (DEM) simulations, experiments, and Analysis of Variance (ANOVA). EDEM 2.7 commercial software was utilized for the mono-disperse simulations while LIGGGHTS(R)-PUBLIC 3.3.1, an open source software, was used for the bi-disperse simulations. DEM models were validated with experimental data. Simulations were performed to explore the effect of impeller rotational speed, vessel fill level, particle number composition, and particle loading arrangement on mixing quality defined by the Relative Standard Deviation (RSD) index. The flow pattern and mixing mechanisms were examined through granular temperature, particle diffusivity, and Peclet number. The impeller rotational speed was the most influential parameter on the mixing performance of mono-disperse particles. The particle number composition was the dominating parameter on the mixing quality of bi-disperse particles
Highlights
The mixing kinetics and flow patterns of non-cohesive, monodisperse, spherical particles in a horizontal paddle blender were investigated using experiments, Analysis of Variance (ANOVA), and discrete element method (DEM)
The validated Discrete Element Method (DEM) model was utilized to examine the effects of three impeller rotational speeds i.e. 10, 40, 70 RPM, three vessel fill levels defined as the volume fraction of mixture bed to the vessel volume i.e. 40, 50, 60 %, and the particle loading arrangement of the mixing components defined as Top-Bottom and Front-Back relative to the front view of the vessel on the overall mixing quality quantified evaluated by the Relative Standard Deviation (RSD) mixing index
This conclusion is in good agreement with the results obtained in the mixing kinetic section, where an increase in impeller rotational speed resulted in higher chaotic motion of particles which in turn produced lower RSD
Summary
Powder mixing is instrumental to a variety of industries including chemicals, food, cosmetics, mining, agriculture, plastics, and pharmaceuticals [1]. The objective of this study was to extensively investigate the mixing performance of a horizontal laboratory-scale agitated paddle blender by investigating the mixing kinetics, flow pattern and segregation mechanism of mono-disperse and bi-disperse particles. This was done by implementing experiments, ANOVA technique and DEM simulations. Chapter five and six summarize the results of the mixing kinetics, flow pattern of mono-disperse and bi-disperse particles in a horizontal paddle blender by using experiments and DEM simulations. Chapter seven draws conclusions and presents recommendations for future investigations based on the results obtained from Chapters five and six
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.