Mixed-mode fracture load prediction in lead-free solder joints

Abstract

Abstract Double cantilever beam (DCB) fracture specimens were made by joining copper bars with both continuous and discrete SAC305 solder layers of different lengths under standard surface mount (SMT) processing conditions. The specimens were then fractured under mode-I and various mixed-mode loading conditions. The loads corresponding to crack initiation in the continuous joints were used to calculate the critical strain energy release rate, J ci , at the various mode ratios using elastic–plastic finite element analysis (FEA). It was found that the J ci from the continuous joint DCBs provided a lower bound strength prediction for discrete 2 mm and 5 mm long joints at the various mode ratios. Additionally, these J ci values calculated from FEA using the measured fracture loads agreed reasonably with J ci estimated from measured crack opening displacements at crack initiation in both the continuous and discrete joints. Therefore, the critical strain energy release rate as a function of the mode ratio of loading is a promising fracture criterion that can be used to predict the strength of solder joints of arbitrary geometry subject to combined tensile and shear loads.