Abstract
This study has investigated fatigue life of Cement Emulsified Asphalt Mortar (CEAM) under mixed-mode I/II loadings at the intermediate temperature. For this investigation, SCB specimens of 16 randomized mixture designs with different cement contents (C), asphalt-to-cement ratios (A/C), and water-to-cement ratios (W/C) were prepared and subjected to the cyclic mixed tensile-shear loading with Me = 0, 0.5, 1.0 at three frequencies of 2, 4 and 8 Hz. The results were analyzed using the d-optimal response surface method and revealed that for all three loading modes, the fatigue life increased with increasing C and A/C. The CEAM also showed a longer fatigue life in the pure shear mode than in the pure tensile mode. The difference between the fatigue life of mode I and II was found to be increasing with the increase in cement content and loading frequency. Increasing the loading frequency increased the fatigue life of the mortar in all three modes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
