Abstract
The mixed convection in a cubical cavity with active lateral walls and filled with a graphene–platinum hybrid nanofluid was investigated numerically and exclusively in the present paper. The lateral left and back sidewalls were kept at a hot temperature (Th), while the lateral right and front sidewalls were kept at a cold temperature (Tc). Both the top and bottom walls were assumed thermally insulated. The top wall of the cavity was considered moving with two different directions. The first one is in the x-direction (case I), while the second case is in the z-direction (case II). Also, the case of the fixed top wall was studied just for comparison. The solid volume fractions have been varied as 0 ≤ φ ≤ 0.1%, while the Richardson number is varied in the range of 0.01 ≤Ri ≤ 10. It was found that the maximum average Nusselt number corresponds to the case when the top wall moving in the negative x-direction. Also, the results indicated that the average Nusselt number increases with the increase in the Richardson number and the solid volume fraction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Thermal Science and Engineering Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
