Abstract

<p>The mix design and properties of the two different types of UHPFRC materials that will be used for the construction of an innovative 46m long, 2-span overpass road bridge are presented. The originality of this bridge construction project is to combine conventional reinforced concrete with UHPFRC to strengthen those zones of the bridge structure which are exposed to aggressive media like deicing salts.</p> <p>Two principally different types of UHPFRC will be used for the bridge construction: a mix for casting on the construction site with a high cement and steel fibre content for the load bearing and water proofing top layer of the bridge deck slab and for an innovative UHPFRC hinge. The kerb and sidewalk overlay elements are prefabricated using a practically proven UHPFRC with comparatively low cement content and low steel fibre content due to the fact that these elements are prestressed. These kerb elements will be directly glued to the bridge deck which is a further step towards an advanced construction system for concrete structures.</p>

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.