Mitigation of Steel Corrosion Threshold Utilizing Plant-Based Green Corrosion Inhibitors through Electrochemical Techniques

Abstract

Corrosion of steel reinforcement is a major cause of deterioration in reinforced concrete structures. The corrosion process is influenced by the concrete-steel interface, with the alkaline concrete pore solution initially providing passivation. However, ingress of aggressive substances like chlorides can disrupt the passive layer, initiating active pitting corrosion above a threshold level often taken as 0.4% chloride by cement weight. Once the chloride threshold is exceeded, corrosion propagation depends on oxygen and moisture availability. The resulting rust formation causes expansive cracking and spalling of the concrete cover. Corrosion damage can be mitigated through use of inhibitors like calcium nitrite though high dosages impair concrete strength. Recently, plant-based organic compounds have shown promise as green corrosion inhibitors. The corrosion behavior of steel in concrete can be evaluated through impressed accelerated corrosion testing along with electrochemical techniques like half-cell potential mapping and resistivity measurements. These allow assessment of the probability of corrosion and corrosion rate. Techniques like linear polarization resistance and electrochemical impedance spectroscopy can also quantify instantaneous corrosion rate. Proper structural condition assessment and repair using both conventional and green inhibitors is crucial to control steel corrosion, maintain service life and ensure safety. Further research is needed on green corrosion mitigation methods and advanced non-destructive testing techniques.