Mitigation of Gravity Segregation by Foam to Enhance Sweep Efficiency

Abstract

Foam-assisted gas injection exhibits promising potential for enhancing sweep efficiency through the amelioration of gravity segregation, particularly within reservoirs characterized by heterogeneity. In this work, the implicit-texture (IT) model featuring two flow regimes is employed to examine the impact of heterogeneity on gravity segregation. The validation of the numerical results for water–gas coinjection and pre-generated foam injection is accomplished through a comparative analysis with analytical solutions. A hypothetical two-layer model with varying permeabilities and thickness ratios is used to examine the impact of foam on gravity segregation. The numerical findings demonstrate satisfactory conformity with analytical solutions in homogeneous reservoirs. A high-permeability top layer in a layered model with a fixed injection rate results in sweep efficiency similar to that of a homogeneous reservoir with each individual permeability. A low-permeability top layer could increase the sweep efficiency, but with severe permeability contrast, the bottom high-permeability layer could impact the displacement process, even with a thin thickness. The sweep efficiency increases with the thickness of the high-permeability top layer and decreases with a thicker low-permeability top layer under fixed injection pressure. The predicted segregation length through a single-layer approximation cannot match the results of the layered models where the permeability contrast is too great or the thickness of two layers is comparable.