Abstract
Due to the limited number of corridors multi circuit line configurations are often applied. These overhead lines frequently consist of high towers that are subject to lightning strokes. In case of higher current amplitudes and higher footing resistances due to bad earthing conditions back-flashovers are caused leading to common mode failures and to severe outages. The paper describes investigations performed by means of computer simulations to identify the towers of a multi-circuit line consisting of voltage levels 380 kV, 220 kV and 110 kV that are endangered by back-flashovers of the 110-kV double-circuit lines. The footing resistance of towers of the targeted line section has been measured by an instrument at high-frequency. Influence of various factors on the back-flashover over 110 kV insulator strings has been studied by means of EMTP-ATP simulations. Different current waveforms of the lightning stroke have been used to represent the first stroke and subsequent strokes. The towers are represented by the models described in [3], [8]. Available flashover analysis methods [7], [8], [12], [13] like leader development method by Pigini et al and by Motoyama, and voltage-time integration method by Kind have been applied. The towers at which back-flashover is more likely to occur than at other towers are identified by the time integral of voltage according to Kind. Various factors like tower footing impedance, tower surge impedance and tower height are considered. Application of line a surge arrester is shown to be a successful mitigation technique to reduce the back-flashover rate of those 110 kV lines. The lightning overvoltage performance of surge arresters has been analyzed by means of digital simulations. Based on the results of investigations line arresters were installed on the towers in question. Since the installation no further common mode failure has been observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.