Abstract

Hydrogen starvation and water flooding are two principal factors resulting in performance deterioration of the proton exchange membrane fuel cell stack at the dead-end anode. This paper proposes a novel hydrogen supply mode called the pulsation mode aimed at mitigating the problems of performance deterioration in a 10-cell open-cathode vapor chamber proton exchange membrane fuel cell stack to increase the performance. This method does not require complex equipment and structure, only four controllable solenoid valves are sufficient to generate periodic pulsation inside the anode channels. The experiments were used to validate the effectiveness of the new mode and to compare the effects of different pulsation frequencies on the performance of the stack. A series of parameters such as voltage, power growth rate, and voltage stability index are used to analyze the operating characteristics of the stack. The results show that the periodic pulsations generated by the new mode are potent of increasing the species mass transfer rate within the anode channels, and the species mass transfer rate increases with the increase of pulsation frequency. Meanwhile, selection of a suitable pulsation frequency can effectively improve stack water management and reduce the probability of hydrogen starvation. Finally, the new mode is able to enhance the voltage down valley of the stack under large external load variation. The ohmic resistance of the stack in the new mode has proved to be lower by the current interruption method. Furthermore, it is capable of increasing the net power of the stack by up to 7.71%.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call