Abstract

An improved mutual coupling compensation in circularly polarized (CP) multi-input multi-output (MIMO) dielectric resonator antenna (DRA) is presented in this paper. Using trimming approach, the mutual coupling (MC) between closely spaced DRA units at 0.3λ has been significantly reduced while axial ratio performance has been maintained. Mutual coupling reduction is obtained by trimming the DRA to ensure low mutual coupling below −20dB. The exclusive features of the proposed MIMO DRA include wide impedance matching bandwidth (BW), triple band circular polarization, and suppressed MC between the radiating elements. The impedance bandwidth matches perfectly with a triple band's 3 dB axial ratio (AR). It is designed with characteristic mode analysis with good agreement of the measurement that has been obtained. Using the probe feed method, the DRA and patch strip are coupled together to allow bandwidth widening of the pro-posed DRA. An impedance bandwidth of 34% at a lower frequency to around 2% at a higher frequency was achieved in all resonance frequencies. Thus, we refer to our newly designed DRA as a proposed method for effectively reducing the mutual coupling between DRAs. Additionally, the 3 dB AR bandwidth matched at 3.3 GHz, 4.6 GHz, and 6.3 GHz with a percentage of 11.66%, 3.04%, and 2.22% obtained at the three different frequencies. Note that the proposed DRA exhibits low mutual coupling (below −20 dB) at the targeted frequencies, which is suitable for better signal reception for MIMO applications. By computing, the metrics envelop correlation coefficient, diversity gain, channel capacity loss, and total active reflection coefficient, the MIMO performance of the proposed antenna is verified. The experiments show a close result between simulated and computed validation of the proposed DRA.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.