Mission Planning for Energy-Efficient Passive UAV Radar Imaging System Based on Substage Division Collaborative Search.

Abstract

In our earlier study, an energy-efficient passive UAV radar imaging system was formulated, which comprehensively analyzed the system performance. In this article, based on the evaluator set, a mission planning framework for the underlying energy-efficient passive UAV radar imaging system is proposed to achieve optimized mission performance for a given remote sensing task. First, the mission planning problem is defined in the context of the proposed synthetic aperture radar (SAR) system and a general framework is outlined, including mission specification, illuminator selection, and path planning. It is found that the performance of the system is highly dependent upon the flight path adopted by the UAV platform in a 3-D terrain environment, which offers the potential of optimizing the mission performance by adjusting the UAV path. Then, the path planning problem is modeled as a single-objective optimization problem with multiple constraints. Path planning can be divided into two substages based on different mission orientations and low mutual correlation. Based on this property, a path planning method, called substage division collaborative search (Sub-DiCoS), is proposed. The problem is divided into two subproblems with the corresponding decision space and subpopulation, which significantly relax the constraints for each subproblem and facilitates the search for feasible solutions. Then, differential evolution and the whole-stage best guidance technique are devised to cooperatively lead the subpopulations to search for the best solution. Finally, simulations are presented to demonstrate the effectiveness of the proposed Sub-DiCoS method. The result of the mission planning method can be used to guide the UAV platform to safely travel through a 3-D rough terrain in an energy-efficient manner and achieve optimized SAR imaging and communication performance during the flight.